Hybond838 High Performance Instant Cyanoacrylate Adhesive
from Shirley(hengying@cnhybond.com 0086-18927302778 Skype:hengying11)
1. Color: Transparent.
2. Product Information
838 Department of the British Constant surface-sensitive α-cyanoacrylate instant adhesives.
838 Department of the British Constant surface-sensitive α-cyanoacrylate instant adhesives.
It is through the special treatment, synthetic made of a high-performance Instant Adhesive
Fast setting, low viscosity ethyl based Powerful adhesive.
Fast setting, low viscosity ethyl based Powerful adhesive.
Applied to shoes, magnetic, glass, metal, stone and other materials
3. Typical uses
it is most suitable for wood, sculpture, magnetic, glass, metal, stone, leather, wood and other materials. It owns such sound features as high strength.
it is most suitable for wood, sculpture, magnetic, glass, metal, stone, leather, wood and other materials. It owns such sound features as high strength.
4. Features
The chemical composition of base material: cyanoacrylate
The chemical composition of base material: cyanoacrylate
Appearance: Transparent
Viscosity (25 ℃, mpa.s): 2-6cps
Time for the beginning of solid (S): -3-8
Shear strength (Mpa): ≥ 27
Viscosity (25 ℃, mpa.s): 2-6cps
Time for the beginning of solid (S): -3-8
Shear strength (Mpa): ≥ 27
Tensile shear strength(kgf/cm2) ≥90
Flash Point (℃) ---------> 80
Fill the largest gap (mm )---- 0.1
Operating temperature (℃ )------- 54 ~ 83
Flash Point (℃) ---------> 80
Fill the largest gap (mm )---- 0.1
Operating temperature (℃ )------- 54 ~ 83
Shelf time: (5℃)12month
5. Caution
(1). Coated should be clean, dry no grease, choice of cleaning agent 7010, the better.
(2). 838 instant adhesive will be in a surface (also have two surface coating).
(3). Compress the two surfaces close up, 10 seconds early curing, 1 minute to reach the initial intensity, in the majority of bonding material on the strength required to achieve 12 ~ 24 hours.
(4). This product is cyanoacrylate, quickly stick to skin and eyes. Once the skin of the spilled materials
(1). Coated should be clean, dry no grease, choice of cleaning agent 7010, the better.
(2). 838 instant adhesive will be in a surface (also have two surface coating).
(3). Compress the two surfaces close up, 10 seconds early curing, 1 minute to reach the initial intensity, in the majority of bonding material on the strength required to achieve 12 ~ 24 hours.
(4). This product is cyanoacrylate, quickly stick to skin and eyes. Once the skin of the spilled materials
没有评论:
发表评论